NEW 1PC CAT40 1-1/2″X 4.0″ FACE MILL TOOL HOLDER G2.5 25000RPM TIR0.0002″ SILVER COATED MODELCAT40 SM1-1/2x 4.0″ RUN OUT (TIR)0.0002″HOLDER TYPEFACE MILL HOLDERARBOR DIAMETER1.5″SHANK TYPECAT40DRAWBAR THREAD5/8-11″BALANCEG2.5 25000rpmGage Length2.0 Your order will be manufactured and shipped in 2 Business day ! All item ship by USPS priority air mail 1-5 days Payment:1. Send PayPal payment 2. Send Check to 192 technology dr. Site P Irvine CA92618Shipping:We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated, all items will be shipped within 1-2 business days after full payment is received (same day if possible). For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery (please contact your local post office to determine estimated taxes and duty fees). While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further questions regarding our shipping policies (international shipping, quantity discounts, combined shipping, etc.) contact us Return and Warranty:Unless otherwise indicated, the below return/warranty conditions shall apply to all listings. Please know we will do everything reasonable to keep you a happy buyer! If you are not satisfied with the item, then you may return the item(s) in original condition, unworn/unused within 14 days of receipt for a refund of the purchase price, less the shipping and handling. All items noted as “final sale” are not refundable. * Please contact us to obtain a Return Authorization (RA) Number & return address. * All returns and exchanges must be postmarked within 14 days from receipt of Return Authorization(RA) Number. * Items must be returned in original unused condition with factory packaging in saleable condition. * Buyer is responsible for return shipping and liable for the package in transit (please use trackable means). * Buyer is responsible for international duties and customs fees. * Refunds will post within 7 business days of receiving the returned package in the original payment form. * Exchanges will be shipped upon receipt of package and payment of reshipping charges. If both quality and cost are your first concern, iCarbide Cutting Tools would be honor to serve you with all of your machining requests.
Item Category: Metals & Alloys
NEW 1PC CAT40 1-1/2″X 4.0″ FACE MILL TOOL HOLDER G2.5 25000RPM TIR0.0002″ SILVER COATED MODELCAT40 SM1-1/2x 4.0″ RUN OUT (TIR)0.0002″HOLDER TYPEFACE MILL HOLDERARBOR DIAMETER1.5″SHANK TYPECAT40DRAWBAR THREAD5/8-11″BALANCEG2.5 25000rpmGage Length2.0 Your order will be manufactured and shipped in 2 Business day ! All item ship by USPS priority air mail 1-5 days Payment:1. Send PayPal payment 2. Send Check to 192 technology dr. Site P Irvine CA92618Shipping:We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated, all items will be shipped within 1-2 business days after full payment is received (same day if possible). For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery (please contact your local post office to determine estimated taxes and duty fees). While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further questions regarding our shipping policies (international shipping, quantity discounts, combined shipping, etc.) contact us Return and Warranty:Unless otherwise indicated, the below return/warranty conditions shall apply to all listings. Please know we will do everything reasonable to keep you a happy buyer! If you are not satisfied with the item, then you may return the item(s) in original condition, unworn/unused within 14 days of receipt for a refund of the purchase price, less the shipping and handling. All items noted as “final sale” are not refundable. * Please contact us to obtain a Return Authorization (RA) Number & return address. * All returns and exchanges must be postmarked within 14 days from receipt of Return Authorization(RA) Number. * Items must be returned in original unused condition with factory packaging in saleable condition. * Buyer is responsible for return shipping and liable for the package in transit (please use trackable means). * Buyer is responsible for international duties and customs fees. * Refunds will post within 7 business days of receiving the returned package in the original payment form. * Exchanges will be shipped upon receipt of package and payment of reshipping charges. If both quality and cost are your first concern, iCarbide Cutting Tools would be honor to serve you with all of your machining requests.
TEGARA CAT40 3/8 X 3 DUAL CONTACT END MILL TOOL HOLDER BALANCED G2.5 20000 NEWMADE IN TAIWAN Product descriptionSKU202-7411TOOL HOLDER CATEGORYEnd Mill HolderBRANDTegaraSHANK SIZECAT40BORE DIAMETER3/8PROJECTION LENGTH3.00MAX RPM BALANCED TOG2.5 20000 TIR (INCH)0.0001DRAWBAR THREAD SIZE5/8x11UNCNOSE DIAMETER1.0DUAL CONTACT TOOL HOLDERYesCOOLANT THRUYes Product applicationMirror FinishedTaper ground to AT3 or better specification ensures 80% or more contact with spindle to reduce harmonics, improve runout tolerance and deliver consistence performanceFlange ContactPrecision mill finished from multi-tasking Mazak machine on the flange face to eliminate the 1/8″ gap between flange and spindle nose to minimize vibrationTaper End FacePrecision turning surface finish provide perpendicular contact with the flange of retention knob to increase rigidityDual ContactWith simultaneous contact on taper and flange face between the spindle and tool holder, dual contact tooling eliminates the 1/8” gap between the flange face and the spindle nose to increase rigidity, minimize vibration, extend cutting tool tool life, and greatly improve workpiece surface finish at aggressive speed & feedDONE IN ONEBy utilizing DONE IN ONE capability from Mazak Integrex machine with a second turning spindle, all processes from raw bar stock material to final machining in just one machine to improve machining accuracy and streamline production output.Mirror Finish To achieve AT3 or better taper contact as an industry standard, our taper surface are precision ground on Shigiya CNC grinder from Japan. We are not satisfied with just meeting the industry standard, the surface roughness on the taper is maintained to mirror finish.Flange and V-groove are precision ground to ensure reliable tool changeSpindle Thru coolant capabilitySHARS Dual Contact tool holder can only be used on machine center with dual contact spindleCompatible with BIG-PLUS ® spindles.*BIG-PLUS® is a trademark of Daishowa Seiki Kabushiki Kaisha; Big Daishowa Seiki Co., Ltd., Corp. Compatible with BIG-PLUS® spindles, but not licensed.Included Each holder comes with a balance reportEnd mill locking screw with 9/16-20 UNF threadWe have other holders & collet chucks available at My Ebay Store: SHIPPING: UPS GroundBuyer pays ACTUAL UPS shipping & insurance, and a $3.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package’s recipient may need to pay these to clear customs. PAYMENT: We accept : VISA, MasterCard and E-Check on PayPal.com Illinois residents add 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller’s discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.
1PC NON COOLANT CAT40 M16X2 PULL STUD RETENTION KNOBS CNC HAAS MACHINE TOOL All pull stud made in alloy steel with 3 times heat-treatment has two hardness degree HRC45-48 and HRC55-58All pull stud machined by DMG CNC machine after heat-treatment. The facility with ISO9000 in 2007approved MODELCAT40 HEAD D10.598OVER LENGTH L2.25 THREADM16X2POLIT D3 0.669SHOULDER l11.26 COLOR OXIDE BLACKNECK DIAMETER D20.392SHOULDER l20.998BRAND iCarbide HANG ANGLE45COOLANT HOLENO Your order will be manufactured and shipped in 2 Business day !All item ship by USPS priority air mail 1-5 days Payment: 1. Send PayPal payment 2. Send Check to 192 technology dr. Site P Irvine CA92618 Shipping:We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated, all items will be shipped within 1-2 business days after full payment is received (same day if possible). For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery (please contact your local post office to determine estimated taxes and duty fees). While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further questions regarding our shipping policies (international shipping, quantity discounts, combined shipping, etc.) contact us Return and Warranty:Unless otherwise indicated, the below return/warranty conditions shall apply to all listings. Please know we will do everything reasonable to keep you a happy buyer! If you are not satisfied with the item, then you may return the item(s) in original condition, unworn/unused within 14 days of receipt for a refund of the purchase price, less the shipping and handling. All items noted as “final sale” are not refundable. * Please contact us to obtain a Return Authorization (RA) Number & return address. * All returns and exchanges must be postmarked within 14 days from receipt of Return Authorization(RA) Number. * Items must be returned in original unused condition with factory packaging in saleable condition. * Buyer is responsible for return shipping and liable for the package in transit (please use trackable means). * Buyer is responsible for international duties and customs fees. * Refunds will post within 7 business days of receiving the returned package in the original payment form. * Exchanges will be shipped upon receipt of package and payment of reshipping charges. If both quality and cost are your first concern, iCarbide Cutting Tools would be honor to serve you with all of your machining requests.
Price is for one Rego-Fix ER16 high speed collet chuck. All holders are in excellent used condition, as pictured. Holder(s) shipped will be chosen at random.
Model H63A-25SF315-9 with 0.83″ Nose, 3.15″ Projection and Rated to 25,000 RPM.
Type & Size : NMTB40. Labeling : 40 SM 2.000X2.500.
RAPIDHOLD CAT40-SLA V-FLANGE END MILL HOLDER G2.5 PRODUCED ACCORDING TO AT3 SPECIFICATIONS TOOLS ARE MADE OF A HIGH QUALITY ALLOY STEEL END MILL SOCKET T.I.R .0002″ THROUGH THE SPINDLE COOLANT CAPABILITY HOLE DIAMETERS ARE MADE IN H5 CLASS DYNAMICALLY BALANCED 2.5 @ 25,000 RPM Connection Diameter Workpiece Side (DCONWS)1/2″ Protruding Length (LPR)4.620″ Body Diameter (BD)1.250″
Brand new in the original packaging. Please review all pictures. Ships free with USPS.
Please check manufacturer for more specs and info.