PGN International presents high-quality, reliable ER70S-6 welding rods perfect for mild steel and low alloy welding. Our welding rod is designed to deliver the best welding performance with its 5% silicon composition. These rods can be used for many applications – from automotive repairs to construction projects. Each wire mild steel rod melts at a temperature of 700-750º Fahrenheit. They are easy to use and require no extensive setup. Whether a skilled tradesperson or just starting, you will feel confident knowing our welding rod is your best bet for success. These welding rods require a shielding gas of 100% argon/CO2, making them perfect for anyone needing reliable welding. Our welding supplies and accessories will help you create defect-free weld deposits. Welders and construction workers can trust the consistency and quality of these ER70S6 rods. The 1 lb pack provides enough welding material for forming several sturdy welds. These top-quality welding rods feature excellent arc stability, smooth weld transfer, low spatter deposits, and minimal smoke production. Our tig welding equipment is perfect for welding mild and low alloy steel. It is also suitable for construction work, farm implements fabrication, shaft buildup, tanks, truck bodies, and general shop applications. The welding rod is appropriate for most metals needing thermal treatment. This engineering rod can be used for many projects, making them the one-stop solution for welders. No matter what kind of project you are working on, you can trust our 1lb ER70S6 to help make it happen.
Item Tag: PGN Bearings
ER70S-6 Mild Steel MIG Welding Wire Wire Diameter: .030″ inches (0.8mm) Weight: 10-lbs Measurements: 8″ inch – Spool Diameter 2″ inch – Center Hole (Hub) Diameter 2″ inch – Wide Spool It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11
ER70S-6 Mild Steel MIG Welding Wire Wire Diameter: .035″ inches (0.9mm) Weight: 20-lbs (2 Rolls – 10-lbs each) Measurements: 8″ inch – Spool Diameter 2″ inch – Center Hole (Hub) Diameter 2″ inch – Wide Spool It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11
G40 Stainless Steel Bearing Balls ISO 9001:2008 Provides higher quality and durability, reducing replacement and maintenance cost Quantity per package: 500 Grade: 40 Material: Stainless Steel (AISI 420) Diameter: 1/4″, 0.25 inches (6.35 millimeter) Weight: 0.03601 ounces (1.021 grams) PGN’s G40 1/4″ Stainless Steel Balls extremely precise and smooth surface guarantees you won’t find any defects, such as flats, pits, soft spots, and cuts.
Weld Your Way to Impressive Results Your choice of MIG wire can make all the difference. It can mean the difference between unsightly splatter and a smooth weld. The difference between exceptional precision and an uncontrollable arc that ruins all your hard work. Choose professional-looking results with PGN. Our E71T-11 flux core MIG wire stands out with impressive arc control and low splatter when working on mild steel. So, you end up with a beautiful weld you’ll be proud to show off. By going for a flux core MIG welding wire, you’ll have the power to ditch that shielding gas cylinder and work outdoors with the wind in your hair. Just turn on your machine, start welding, and watch the flux filling work its magic. Product Specifications:Weight: 4 PoundsPackage Inclusions: 2 x 2lb MIG Wire SpoolWire Diameter: .035″ InchesSpool Diameter: 4″ InchesSpool Center Hole Diameter: 0.75″ InchesSpool Thickness: 1.75″ InchesTensile Strength (RM MPa): 556Deposited chemical composition: (wt%) C: 0.04 / Mn: 0.48 / Si: 0.078 / S: 0.009 / P: 0.01 Cr: 0.011 / Ni: 0.008 / Mo: 0.0001 / V: 0.0001 / Cu: 0.015 Experience the Versatility Whether you’re tackling a client’s project, performing repairs in the garage, or bringing striking metal art to life, the E71T-11 flux core welding wire .035 allows you to create a variety of welds when working in all manner of positions. It’s ideal for both single & multi-pass welding and leads to aesthetic T-joints, butt welds, and lap welds. And with a wire thickness of 0.035″, you’ll achieve great penetration without the high risk of burning through the base metal. With PGN, you also don’t just get a gasless MIG welder wire that will take your work to the next level; you get the support of an experienced team based right in South Florida. Go ahead, get MIG welding accessories you can count on.
#120 Roller Chain x 10 feet ANSI Chain No.: #120 Lenght: 10 feet Pitch (P): 1.5 inch (38.1 mm) Roller Diameter (d1 max): 0.875 inch (22.23 mm) Width Between Inner Plates (b1 min): 0.992 inch (25.22 mm) Pin Diameter (d2 max): 0.437 inch (11.1 mm) Pin Lenght (L max): 1.98 inch (50.3 mm) Pin Lenght (Lc max): 2.137 inch (43.3 mm) Inner Plate Depth (h2 max): 1.405 inch (35.7 mm) Plate Thickness (T max): 0.188 inch (4.8 mm) Ultimate Tensile Strenght (Q min): 127/28864 kN/LB Average Tensile Strenght (Qo): 156.3 kN Weight (q): 3.776 lb/ft (5.62 kg/m)
ANSI Chain No.: #420 Lenght: 10 feet Pitch (P): 0.5 inch (12.7 mm) Roller Diameter (d1 max): 0.30 inch (7.77 mm) Width Between Inner Plates (b1 min): 0.24 inch (6.25 mm) Pin Diameter (d2 max): 0.15 inch (3.96 mm) Pin Lenght (L max): 0.66 inch (17 mm) Pin Lenght (Lc max): 0.72 inch (18.4 mm) Inner Plate Depth (h2 max): 0.47 inch (12 mm) Plate Thickness (T max): 0.07 inch (2.03 mm) Ultimate Tensile Strenght (Q min): 16.00/3636 kN/LB Average Tensile Strenght (Qo): 18.1 kN Weight (q): 0.76 lb/ft (0.34 kg/m)
The PGN Bearings E6013 stick welding rods 10LB 3/32″ is designed for precision welding on clean or lightly prepared surfaces.
G500 Carbon Steel Bearing Balls ISO 9001:2008 Provides higher quality and durability, reducing replacement and maintenance cost Quantity per Package: 500 Pcs Grade: 500 Material: Carbon Steel Diameter: 3/8, 0.375 inches (9.525 millimeter) Weight: 0.12529 ounces (3.5519 grams) PGN’s 3/8″ Carbon Steel Balls extremely precise and smooth surface guarantees you won’t find any defects, such as flats, pits, soft spots, and cuts.
ER70S-6 Mild Steel MIG Welding Wire Wire Diameter: .030″ inches (0.8mm) Weight: 33-lbs Roll Measurements: 10.5″ inch – Spool Diameter 2″ inch – Center Hole (Hub) Diameter 4″ inch – Wide Spool It can be used in tee welding of carbon steel and low alloy steel in the corresponding strenght grade. The Roll comes packed in moisture-resistant plastic film. Deposited chemical composition: (wt%) C: 0.08 / Mn: 1.50 / Si: 0.89 / Cr: 0.02 / Ni: 0.03 Mo: 0.002 / P: 0.013 / S: 0.012 / V: 0.003 / Cu: 0.11